WMF 1500S+ - Grinding Degree Setting; Nutritional Information; Quality Check (Dynamic Milk)

66
User Manual WMF1500 S +
Software | System
Grinding degree setting
The grinding degree can be adjusted from the display.
Lower number -> finer grinding degree
Higher number -> more coarse grinding degree
Maximum half agrinding degree can be adjusted in
each step. The grinder must be run between each
adjustment.
Only for trained personnel and service.
Nutritional information
Detailed information on about nutritional values and
ingredients can be captured here for each grinder,
portioner, milk, and milk foam.
An overview is available.
Quality Check (DynamicMilk)
External influences can cause changes to the milk
temperature, milk foam volume, and milk foam quality
in the milk system.
The “Quality check” menu can be used to reset the
settings to their base values.
 Fill the blue cleaning container with cold water
 Connect the milk hose
 Place ameasuring cup with 500ml capacity under
the spout
 Start the calibration
 As soon as the measuring cup has been filled with
500ml (+/- 20ml), stop the calibration
Grinding degree setting
DS_04_10_07
Nutritional information
DS_04_10_12
Quality check
DS_04_10_13