94
Example: Dispensing a cup of coffee
1. Place a cup under the coffee spout 6.
2. Press the beverage key labelled Cup on the control
panel 5.
3. While dispensing is taking place, the green LED
(key ring) for the beverage key you have pressed
flashes. The other key lights (rings) are
extinguished.
4. When the dispensing process has been completed,
the machine is ready again for dispensing.
Each cup, mug, pot or jug of coffee is dispensed from the
storage urn.
7.7 Coffee and hot water dispensing
When the machine is operational, coffee or hot water can
be dispensed by pressing one of the beverage keys 13 or
the hot water key 10.
Caution!
There is a danger of burning and scalding in the
area of the coffee spout 6 and the hot water spout 11.
Coffee or hot water can be dispensed in three different
ways via the coffee spout 6 and the hot water spout 11:
4. Measured dispensing
Press one of the beverage keys 13 or the hot water key
10 to start dispensing coffee or hot water. Dispensing
stops automatically when a pre-defined quantity has
been dispensed (see chapter 8.3.1 on page 98).
5. Start-Stop function
Press one of the beverage keys 13 or the hot water key
10 to start dispensing coffee or hot water. Press again to
stop.
6. Free flow
Coffee or hot water dispensing continues as long as the
beverage key 13 or the hot water key 10 is pressed.
Your WMF customer service engineer will set your
preferred alternative for you as required.
10
11
13
6
To Next Page
Loading...
Need help?
General
