Zone
no.
Symbol on display Description
3
Control using multiple switch.
Control by means of Home.
Control using touchscreen on appliance; this setting is active for half an hour.
Control using touchscreen on appliance; touchscreen is permanently set as multiple switch
by setting step number 15.4 to "yes".
Control using humidity sensor.
Control using CO
2
sensor.
Control using demand-driven ventilation.
Break contact active or make contact active.
This appliance is set as Master appliance if a number of appliances are connected
(cascade)
Appliance is set as Slave appliance; maximum of 9 appliances can be connected to a
Master.
Control via eBus for example BM-2 .
Control via ModBus or externalBus.
Bypass boost is active.
Display
xxxx
20 | WOLF GmbH 7100832_202010
To Next Page
Loading...
