Wolf CWL-2-400 - Connecting Extra Multiple Switch with Filter Indication

11.1.4 Connecting extra multiple switch with filter indication
A = CWL -2-400 appliance
B = Multiple switch with filter indication
C = Receiver for wireless remote control
D = Transmitter with 2 settings
E = Splitter
F = Modular cable: Note: For the modular cable that is used, the “tab” of both modular connectors must
be mounted facing the mark on the modular cable. Wire colors C1 - C6 may vary dependent on the type
of modular cable used.
Electrical connections accessories
xxxx
38 | WOLF GmbH 7100833_202010