OPERATION
Pre-Operation Check
Operation EGdoc091010 3-2
3
5. Be sure all guards and covers are in place and secured.
DANGER! Make sure all guards and covers are in place and secured
before operating or towing the Edger. Failure to do so may result in
serious injury.
6. Also be aware that the blades are spinning whenever the motor is ON. You should always turn off the
motor to stop the blade whenever the Edger is not in use and ensure that all parts have stopped
moving before removing any covers or guards.
WARNING! Coastdown Required. Always shut off the motor and allow
all moving parts to come to a complete stop before removing any
guards or covers. Do NOT operate with any guards or covers removed.
WARNING! Always shut off the motor to stop the blade whenever the
Edger is not in use. Failure to do so may result in serious injury.
IMPORTANT! If at any time you need to immediately stop the motor
and/or Edger operation, press the Emergency Stop button located at
the front or at the rear of the Edger.
FIG. 3-0
!
Tb0054
Emergency Stop
Twist to release
Tb0045B
To Next Page
Loading...
