SPECIFICATIONS
Multirip Edger Specifications
Specifications EGdoc082710 6-2
6
6.2 Multirip Edger Specifications
See Table 6-2. The power option specifications of the Wood-Mizer Edger is listed below.
See Table 6-3. The noise level of the Edger is given below.
1
2
Motor Specifications Motor Specifications
Motor Type E20 Electric Motor E25 Electric Motor
Manufacturer Tamel S.A., Poland INDUKTA
Voltage at 380V 380-420V 380-420V
Maximum Current 26.7 A 32.2 A
Maximum Torque 2920 RPM 2920 RPM
Rated Output 15kW ( 20HP ) 18.5kW ( 25HP )
Manufacturer Part # Sg160M2BHM SG160ML2HM
WM Part # 087929 096622
TABLE 6-2
Engaged
Edger
Equipped With E20 Electric Motor
84 dB (A)
TABLE 6-3
1. The noise level measurement was taken in accordance with PN-EN ISO 3746 Standard. The noise exposure
level given above concerns an 8-hour work day
2. The measured values refer to emission levels, not necessarily to noise levels in the workplace. Although there is
a relation between emission levels and exposure levels, it is not possible to determine with certainty if preventives
are needed or are not needed. The factors affecting a current level of noise exposure during work are inter alia
room characteristics and characteristics of other noise sources, e.g. number of machines and machining
operations nearby. Also, the permissible exposure level value may vary depending on country. This information
enables the machine’s user to better identify hazards and a risk.
To Next Page
Loading...
