Wood-mizer Edger Multi-Rip - Anti-Kickback Assembly & Press Roller

PARTS
Anti-Kickback Assembly & Press Roller
7
7-2 EGdoc091010 PARTS
7.2 Anti-Kickback Assembly & Press Roller
REF DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY.
1 ROD, 25X810 HANDLE MOUNTING 089089-1 1
2 PLATE WELDMENT, ANTI-KICKBACK 089087-1 1
3 RING, 25 ZINC STOPPING LIGHT TYPE F81039-4 4
4 SCREW, M8X8-33H HEX SOCKET SET FLAT POINT ZINC F81014-1 4
5 KEY, 1/4" X 1 11/16" 089229 2
6 SHAFT, ANTI-KICKBACK FINGER 089088-1 1
7 FITTING, M6 "A" TYPE STRAIGHT GREASE 086280 1
8 HANDLE WELDMENT, ANTI-KICKBACK RELEASE 089086-1 1
9 FINGER, ANTI-KICKBACK 089079-1 51
10 BUMPER, RUBBER 089147 2
11 ROD, SAWDUST SHIELD 089236-1 1
12 PLATE, SAWDUST SHIELD ZINC-PLATED 089234-1 18
13 WASHER, 6.4 FLAT ZINC F81053-1 2
14 BOLT, M6 x 16 8.8 HEX HEAD FULL THREAD ZINC F81001-15 2
PRESS ROLLER ASSEMBLY 089156 1
15 PIVOT WELDMENT, PRESS ROLLER 089063-1 1
16 BEARING, UCFL 205 W/HOUSING 089124 2
17 ROLLER, PRESS 089262-1 1
18 BOLT, M16X40-8.8 HEX HEAD FULL THREAD ZINC F81006-13 4
19 NUT, M16-8 HEX NYLON ZINC LOCK F81036-2 4
20 SCREW, M6X8 45H HEX SOCKET SET CONE POINT F81013-1 2
1
2
3
4
5
6
7
8
9
10
10
12
13
14
15
16
16
18
18
17
19
19
24
25
26
27
3
3
4
5
3
11
20
20
21
23
22
22
28
Tb0052a