SAWMILL ASSEMBLY
Unpacking the Sawmill
SAWMILL ASSEMBLY 15doc092413 2-8
2
2.2 Unpacking the Sawmill
1. Cut the bands holding the components together.
2. Remove the parts arranged inside the bed section.
3. Using a forklift truck or a winch with lifting capacity of minimum 500 kg, carefully lift the saw head
and set it aside. Then attach the winch hook to the bracket on the saw head.
WARNING! When removing the saw head, use extreme care and
keep all persons at a safe distance. Failure to do so may result in
serious injury or death.
FIG. 2-0
To Next Page
Loading...
