Wood-mizer LT15 - Tracking The Blade

SAWMILL ASSEMBLY
Power Feed Rope Assembly
2
2-19 15doc092413 SAWMILL ASSEMBLY
2.7 Power Feed Rope Assembly
1. Prepare the rope for installation by placing steel caps on its ends.
2. Mount rubber bumpers with brackets to the bed extensions - See figure below.
f574b
086182-1 Mount
Weldment, Carriage Stop
F05012-21 Cotter Pin
P12165 Rubber
Bushing
M10x30 Bolt
Split Washer 10.2
Flat Washer 10,5
501414-1 Bumper
Mount Bracket
500845 Bed
Extension, Front
500843 Bed
Extension, Rear