Setup & Operation
Water Lube Operation
Setup & Operation 15doc092413 3-23
3
3.14 Water Lube Operation
The optional Water Lube System keeps the blade clean. Water flows from a 5-gallon (18.9 liter)
bottle through a hose to the blade guide where the blade enters the log. A valve in the bottle cap
controls the amount of water flow.
See Figure 3-5. Install the water bottle bracket at the top of the saw head mast (if the bracket was
not already welded to the saw head mast).
FIG. 3-5
Place bottle assembly on
bracket
To Next Page
Loading...
