Maintenance
3
3-1 1510doc111714 Maintenance
SECTION 3 MAINTENANCE
1. Grease the trailer axle wheel bearings with lithium grease every 3 months or 1,000 miles
(1,609 km), whichever comes first.
2. Make sure that the trailer tires are correctly inflated to the pressure shown on the tire.
CAUTION! Always check trailer tires for proper inflation
before towing sawmill. Failure to do so may result in
machine damage.
3. Check the adjustment of the trailer hitch coupler bracket frequently and adjust if neces-
sary. Replace any bent or otherwise damaged parts before using the hitch. Use only parts
provided by the hitch manufacturer for this hitch model.
To Next Page
Loading...
