To Next PageTo Next Page
Need help?Do you have a question about the Wood-mizer MP360 and is the answer not in the manual?
General| Max planing width | 360 mm |
|---|---|
| Max planing height | 160 mm |
| Max material removal per pass | 3 mm |
| Feed speed | 3-15 m/min |
| Max Cutting Width | 360 mm |
| Max Cutting Height | 160 mm |
| Motor Power | 4 kW |
| Voltage | 400 V |
Provides contact details for Wood-Mizer sales and service in the US and Canada.
Details contact information for Wood-Mizer's headquarters in USA, Canada, Brazil, and Europe.
Outlines warranty terms, conditions, limitations, and exclusions, including the five-year chassis warranty.
Explains warning symbols and lists essential safety rules for operating the planer/moulder.
Covers machine receipt, handling, applications, safety zones, and operating environment.
Lists tools needed and describes the MP360's construction and features.
Provides steps for component assembly and initial setup before operation.
Instructions for machine placement, electrical setup, and chip extraction system requirements.
Explains table alignment, critical pre-start checks, and control panel functions.
Covers safety before access and setting adjustments for bottom and top cutters.
Covers safety, mounting in pairs, and the procedure for installing molding knives.
Safety, operation, and the process for replacing side cutter knives.
Guides on fence, cutter width, pressure rollers, and feed motor settings.
Outlines cleaning, lubrication, and storage procedures.
Explains chassis plan adjustment, top cutter parallelism, and profile setup tips.
Provides the electrical schematic and essential safety warnings.
Lists machine specifications, capacities, and technical data.
Lists components with location numbers, descriptions, and quantities.
Provides diagrams showing component locations and various views of the machine.
