Woods MAN0962 User Manual (English)

Questions and Answers:

E
Erik Ruiz MDAug 14, 2025
Why Woods Cutter does not cut?
- M
  Michael Calhoun DVMAug 14, 2025
  Your Woods Cutter might not be cutting due to several reasons. The blades could be dull, in which case you should sharpen them. Alternatively, the blades may be worn or broken, requiring replacement in pairs. Ensure the PTO speed is set correctly. If the ground speed is too fast, reduce it. Also, verify the drive shaft connection and check the gearbox for any malfunctions. Repair the gearbox if there's excessive clutch slippage. Lastly, confirm the blade edge is correct for the direction of rotation.
S
Sherry DoughertyAug 17, 2025
What to do if Woods Cutter has streaks or ragged cut?
- B
  Bonnie PierceAug 17, 2025
  If your Woods Cutter is leaving streaks or a ragged cut, it could be due to broken or worn blades, which you should replace or sharpen. Also, make sure to level the machine and reduce ground speed. Lower the cutting height, being careful not to let the blades frequently hit the ground. If you're cutting excessive lush and tall vegetation, recut at a 90° angle to the first pass.
M
michellehowardAug 21, 2025
Why Woods Cutter has excessive clutch slippage?
- M
  Melissa MayAug 21, 2025
  Excessive clutch slippage in your Woods Cutter can be caused by a clutch that is out of adjustment, which requires adjusting the clutch. It could also be that the clutch discs are worn and need replacement. Another cause may be blades hitting the ground, so raise the cutting height.
F
fwrightAug 26, 2025
Why Woods Cutter has vibration?
- F
  frostamandaAug 26, 2025
  Vibration in your Woods Cutter can stem from a broken blade, so replace blades in pairs. It may also be caused by bearing failure, so check gearbox shafts for side play. Reset the hitch length if it's incorrect. If it is a universal drive, adjust the pedestal bearing height to be parallel to the ground.
S
Samuel HarperAug 28, 2025
How to fix excessive side skid wear on Woods Cutter?
- T
  Thomas SullivanAug 28, 2025
  If your Woods Cutter is experiencing excessive side skid wear, it's likely because you are running with the skids continuously on the ground. To resolve this, raise the cutting height or adjust.
J
james26Sep 1, 2025
What to do if Woods Cutter blades are hitting deck?
- R
  Roberta PierceSep 1, 2025
  If the blades of your Woods Cutter are hitting the deck, it's likely due to bent blades or a bent crossbar. Replace the bent blades or crossbar to resolve this issue.
L
Lacey HallSep 5, 2025
What to do if Woods Cutter unit will not raise?
- M
  martinezbrianSep 5, 2025
  If your Woods Cutter unit won't raise, it's likely due to low oil. Add hydraulic oil to resolve this issue.
D
David KnightSep 9, 2025
Why Woods Cutter unit doesn’t cut level?
- H
  Holly OliverSep 9, 2025
  If your Woods Cutter unit isn’t cutting level, it could be because the wing section cuts lower than the center. Lengthen the turnbuckle connecting the center yoke to the wing wheel yoke. Alternatively, if the wing section cuts higher than the center, shorten the turnbuckle connecting the center yoke to the wing wheel yoke.

Woods MAN0962 Specifications

General

Brand	Woods
Model	MAN0962
Category	Cutter
Language	English

Summary

Introduction

To The Dealer

Instructions for dealers on product assembly and release.

To The Owner

Guidance for owners on manual usage, maintenance, and dealer support.

Specifications

Model Specifications

Key technical dimensions and capabilities for different models.

General Information

Manual Purpose and Disclaimers

Explains manual's intent and notes on potential design changes.

Safety Video Order Form

Free Mower Safety Video

Information on ordering a free safety video from the manufacturer.

Safety Rules

Preparation

Checks and procedures before starting equipment operation.

Transportation

Rules and precautions for moving the equipment.

Operation

Guidelines for safe use of the equipment.

Maintenance

Safety procedures for servicing and repair work.

Storage

Steps for safely storing the equipment when not in use.

Safety & Instructional Decals

Decal Identification

Location and description of various safety and instructional decals on the machine.

Operation

Connecting Cutter to Tractor

Steps for attaching the cutter to the tractor's PTO.

Cutting Height Adjustment

Procedures for adjusting the cutting height for optimal performance.

Transporting

Procedures and safety measures for transporting the cutter.

Storage

Steps for safely storing the equipment when not in use.

Owner Service

Blocking Method

Safe procedures for blocking the cutter for maintenance.

Lubrication

Schedule and types of lubricants for various components.

Blades

Instructions for blade removal, installation, and sharpening.

Shielding Repair

Procedures for repairing rubber and chain shielding.

Troubleshooting

Common Problems and Solutions

Table of issues like 'Does not cut' and their possible causes/solutions.

Dealer Service

Gearbox Maintenance

Procedures for inspecting and maintaining gearboxes.

Splitter Gearbox Repair

Steps for disassembling and assembling splitter gearboxes.

Crossbar Removal

Instructions for removing the crossbar assembly.

Universal Joint Repair

Procedures for disassembling and assembling universal joints.

Assembly Instructions

Dealer Set-Up Instructions

Tasks for dealers to perform before customer delivery.

Fill Gearboxes

Instructions for filling the gearboxes with oil.

Install Wing

Steps for attaching the cutter wings.

Install 3-Joint Drive

Procedures for installing the 540 RPM drive system.

Install CV Drive

Steps for installing the optional Constant Velocity drive.

Dealer Check Lists

Pre-Delivery Check List

Items for dealers to inspect before delivering the equipment.

Delivery Check List

Key points for dealers to show customers during delivery.

Parts Index

Main Frame Assembly (Front Section)

Illustrated parts list for the front section of the main frame.

Wing Assembly

Illustrated parts list for the wing assemblies.

Splitter Gearbox Assembly

Illustrated parts for splitter gearbox assemblies (Style A & B).

Wing & Center Gearbox Assembly

Illustrated parts for wing and center gearbox assemblies (Style A & B).

Bolt Torque Chart

SAE and Metric Torque Values

Recommended torque specifications for various bolt sizes and grades.

Bolt Size Chart & Abbreviations

Bolt Size Chart

Visual guide to bolt thread sizes and corresponding wrench sizes.

Abbreviations

Glossary of technical terms and acronyms used in the manual.

Index

Manual Index

Alphabetical listing of topics and their corresponding page numbers for quick reference.

Warranty

Product Warranty Information

Details on warranty coverage, duration, and exclusions for the product.

Related product manuals

Woods BRUSHBULL BB48X

66 pages

Woods BATWING BW15.60

68 pages

Woods BRUSHBULL BB6000X

50 pages

Woods BRUSHBULL BB48.30

56 pages

Woods BRUSHBULL BB72.30

56 pages

Woods MAN0962 User Manual

Table of Contents

Questions and Answers:

Woods MAN0962 Specifications

Summary

Introduction

To The Dealer

To The Owner

Specifications

Model Specifications

General Information

Manual Purpose and Disclaimers

Safety Video Order Form

Free Mower Safety Video

Safety Rules

Preparation

Transportation

Operation

Maintenance

Storage

Safety & Instructional Decals

Decal Identification

Operation

Connecting Cutter to Tractor

Cutting Height Adjustment

Transporting

Storage

Owner Service

Blocking Method

Lubrication

Blades

Shielding Repair

Troubleshooting

Common Problems and Solutions

Dealer Service

Gearbox Maintenance

Splitter Gearbox Repair

Crossbar Removal

Universal Joint Repair

Assembly Instructions

Dealer Set-Up Instructions

Fill Gearboxes

Install Wing

Install 3-Joint Drive

Install CV Drive

Dealer Check Lists

Pre-Delivery Check List

Delivery Check List

Parts Index

Main Frame Assembly (Front Section)

Wing Assembly

Splitter Gearbox Assembly

Wing & Center Gearbox Assembly

Bolt Torque Chart

SAE and Metric Torque Values

Bolt Size Chart & Abbreviations

Bolt Size Chart

Abbreviations

Index

Manual Index

Warranty

Product Warranty Information

Related product manuals