22
Fault finding
Greenstar i System
ErP
– 6 720 806 947 (2015/03)
7.1 Appliance alert state
In the event of an alert, a fault code and an alert symbol will be displayed, and the blue operation/fault light will flash.
The information about the alert state will flash and scroll along the text display segment of the screen, giving more details of the alert
state.
Fig. 12 Alert state example
7.2 Appliance reset
▶ To reset the appliance, press briefly once.
▶ “Reset” and are briefly displayed.
▶ If the reset was successful the appliance will return to normal operation.
▶ If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
Fig. 13 Reset confirmation
Due to the internal safety systems of your Greenstar i appliance, some codes cannot be cleared by a simple reset. Please contact
Worcester, Bosch Group for further assistance.
When calling Worcester, Bosch Group about a fault, it will be useful to quote the alert code and three digit number under the alert
code, e.g. EA and 227. If there is a fault that cannot be reset by you, the user, then a service engineer visit will be necessary.
To Next Page
Loading...
Need help?
General