Worcester Greenstar FS 30CDi Regular - ELECTRODE ASSEMBLY AND BURNER REPLACEMENT; PRIMARY HEAT EXCHANGER REPLACEMENT

SERVICING
& SPARES
INSTALLATION & SERVICING INSTRUCTIONS
REPLACEMENT PARTS
8 716 115 216b (09.2008)
39
REPLACEMENT PARTS
Sensors:
Check that the appliance is electrically
isolated.
Flow temperature sensor (A):
Remove the connector.
Release the sensor clip and withdraw
the sensor.
Apply heat transfer paste to the
replacement sensor.
Safety temperature limiter (B):
Remove the connectors.
Unscrew the sensor.
Flue Temperature limiter (H):
Remove the connector.
Unscrew the sensor.
A
B
H