20
XII. STORAGE
1. When not in use the GO-A8 should be stored in a clean, dry & sheltered
area, safely out of the way.
2. If a sheltered area is not available and/or not practical, WORKMASTER's
water-proof, puncture and tear resistant Protective Cover will provide
excellent protection from both the elements and unloading site debris.
See Section XVI for ordering information.
3. For prolonged storage (more than 2-weeks), the GO-A8 should be
operated, at free-speed, for about 10-minutes. This will allow oil to coat
the Impactor's internal components.
4. All accessories including the Drive Fitting, should be stored in the
GO-A8's Tool Box. Do not leave these items attached to the Impactor if
they are not being used.
To Next Page
Loading...
