28
7. After the Impactor has been assembled, pour 2 oz. (6-8 squirts) of TOOL-
LUBE air tool oil (supplied) in the Air Inlet to ensure immediate lubrication
of the complete tool.
8. Before installing Impactor into Cart Frame, operate Impactor for a
short period (3 to 5 minutes) of time to test for proper operation.
9. Check the free speed at the ANVIL (36) with a tachometer. Speed is
1500 RPM (approx.) at 85 PSI using 150 CFM (approx.).
To Next Page
Loading...
