d) Remove all adjusting tools or spanners before you switch the
power tool on. A tool or spanner in contact with a rotating part
of the device may result in injury.
e) Avoid an abnormal posture. Maintain a safe stand and keep
your balance at all times. This will allow you to have better con-
trol of the power tool in the event of unexpected situations.
f) Wear suitable clothing. Do not wear any loose-fitting cloth-
ing or jewellery. Keep your hair, clothing and gloves away
from the moving parts. Loose clothing, jewellery or long hair
may get caught in the moving parts. It is recommended that you
wear firm gloves, non-slip shoes and protective goggles.
g) If you can attach dust extractors and dust collectors, make
sure that they are connected and used properly. Using a dust
extractor may reduce risks associated with dust.
4. Using and handling the power tool
a) Do not overload the device. Use the right power tool for your
work. The right power tool will ensure that you work more effec-
tively and safely within the specified power range.
b) Do not use a power tool if its switch is defective. A power tool
that can no longer be switched on or off is dangerous and must
be repaired.
c) Pull the plug out of the socket and/or remove the recharge-
able battery before you make any adjustments to the device,
change the accessories or put away the device. This precau-
tion will prevent the power tool from accidentally starting.
d) Keep unused power tools out of the reach of children. Do not
let persons use the device who are not familiar with the de-
vice or have not read these instructions. Power tools are dan-
gerous if used by inexperienced persons.
e) Take good care of the power tools. Check to make sure that
the moving parts are functioning properly and not stuck,
whether parts are broken or damaged so as to affect the
function of the power tool. Have damaged parts repaired
before you use the device. A large number of accidents are
caused by poorly maintained power tools.
To Next Page
Loading...
Need help?
General
