Declaration of conformity (see chapter “Declaration of conformity”):
Products marked with this symbol meet all applicable Community regu-
lations for the European Economic Area.
Caution: Laser beam!
Do not look into the laser beam!
Attention!
Risk of injury due to sharp edges!
Wear protective goggles!
Wear ear protection!
Wear respiratory protection!
Safety
Proper use
The table saw is only for cutting woods of all kinds lengthwise and crosswise (only
with the cross guide) in accordance with the size of the machine. Round lumber, re-
gardless of the kind, may not be cut. Only saw blades suitable for the machine (HM or
CV saw blades) may be used. The use of HSS saw blades and cutting discs of any kind
is prohibited. The table saw is only intended for private use and not suitable for com-
mercial purposes.
Only use the table saw as described in this instruction manual. Any other use is
deemed improper and may result in damage to property or even personal injury.
The table saw is not a children's toy.
The manufacturer or vendor accepts no liability for damage caused by improper or
incorrect use.
To Next Page
Loading...
Need help?
General
