HANGZHOU BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 16 -
The Stop, Solo, Mute button toggles between four different states which affect tracks in the following ways:
Stop (Blue) – In this state, pressing pads will stop any clip on the corresponding track. The blue pads will light out if tracks are not
playing.
Solo (Yellow green) - Pressing the pads will solo the corresponding tracks, meaning only tracks with Solo on will be heard.
The pads will light out if tracks are not soloed (ie they are silent) and if soloed they will be in light yellow.
Mute (Light pink) – Pressing pads will Mute the corresponding tracks.
The pads will light out for muted tracks, leaving pads for unmuted tracks at their original brightness and colour.
Clips (White) – the fourth press (after toggling through Stop, Solo and Mute) changes the function of bottom pads back to the default
Session mode, where the bottom row of pads will represent clips again . The clips that are playing will be in white color and flickering.
6.1.5 Record / Capture MIDI
Pressing this button triggers Session Record. This will allow you to record what you’re playing to new clips as well as overdub existing
ones.
Holding Shift and pressing Record triggers the Capture MIDI function. This allows you to retrospectively capture any recently played
MIDI notes in the record-armed track. This means that if you are not recording, but you play something that sounds great, you can use
Capture MIDI to send it straight into a clip.
6.1.6 Playing and Recording Drums
Drum mode transforms the Orca mini 25’s pads into velocity-sensitive drum pads.
Hold Shift and press the Drum pad (2nd from the top left) to enter this mode.
If a Drum Rack (an Ableton MIDI instrument) is loaded onto the selected Live track, and the Orca mini 25 is in Drum mode, the pads light
To Next Page
Loading...
