HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
(5)Press the “Enter” button to confirm and the LCD will display “Done”.
2.5.3ASSIGNABLE SLIDER
There’re 9 sliders that can be assigned controller No(49/61 only)independently. First press the “assign” button Then
operate the slider, and the LCD shows the controller number and the controller value. Input the No. with NUMERIC
button or +/-button when the slider is selected, The numbers are the controllers. You also need to use the “Enter” button
to confirm the data.
For example: if you want to assign RF1 to Expression control 11, operation steps is shown as below:
(1)Press the SHIFT button for one or two times until the LCD displays “Shift Off”.
(2)Press the “Ctrl Assign” button and the LCD displays “Assign”.
(3)Operate F1 slider.
(4)Press numeric button “11” twice and the LCD will display “11” on the bottom- left corner.
(5)Press the “Enter” button to confirm and the LCD will display “Done”.
2.5.4 ASSIGNABLE WHEEL
The modulation and pitch bend are the default function of the 2 wheels. It can be assigned controller No. independently.
First press the “assign” button. Then operate the wheel to select the wheel, and the LCD shows the controller number
and the controller value. Input the No. with NUMERIC button or +/- button when the wheel is selected. The numbers are
the controllers. You also need to use the ‘’Enter’’ button to confirm the data.
2.5.5 ASSIGNABLE PEDAL
2 pedal interfaces that can be assigned controller No. independently. First press the ”assign” button. Then operate the
pedal to select it, and the LCD shows the controller number and the controller value. Input the No. with NUMERIC button
or +/- button when the pedal is selected. You need to use enter to confirm the data.
2.5.6 MASTER VOLUME
It sends GM Master Volume message（F0 7F 7F 04 01 00 xx F7）.
2.5.7 PAD SETTING
Activate a pad and press the Ctrl Assign button, the LCD display will display the currently assigned controller
of the pad. The controller number 128 is for pad note. Press “shift” to edit the Pad note. Enter the new pad
number you want the pad to be assigned with the numeric button or +/- button. For example: if you want to assign PAD1
to control 34, operation steps is shown as below:
(1)Press Pad1.
(2)Press the SHIFT button for one or two times until the LCD displays “Shift Off”.
(3)Press the “Ctrl Assign” button and the LCD displays “Assign”.
To Next Page
Loading...
