HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
3.2 Other controls
3.2.1 MUTE
MUTE ON/OFF function button. When MUTE function is ON, The LCD shows ‘MUTE ON’
no MIDI info will be sent. The operation steps and LCD displays the following:
(1)Press the SHIFT button for one or two times until the LCD displays “Shift ON”.
(2)Press the “MUTE” button for one or two times until the LCD displays “Mute_ON”.
(3)Press the “Enter” button to confirm and the LCD will display “Done”.
3.2.2 ASSIGN
ASSIGN mode ON/OFF function button. When ASSIGN mode is ON, The LCD shows ‘ASSIGN’,
default as assigning the controller number. that is assignable. Operate the controller to be assigned
and select the very controller LCD shows the controller No. of current controller. Input the desired
controller No. with NUMERIC button or +/- button (e.g. when a dial is selected, LCD shows the default
No. 007. If you input 010, the dial is assigned as PAN).The LCD displays the following:
3.2.3 GM
GM:Press CHAN and BANK L buttons at the same time(25)/GM ON button(49 and 61)to send GM ON message
F0 7E 7F 09 01 F7). The LCD shows ‘GM ON’ when the message is sent. The LCD displays the following:
To Next Page
Loading...
