HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
3.4.2 ENTER
Press ENTER to confirm the data.
3.5 Pad Control
3.5.1 Pressure Control
Using the pressure control, the pads give you a different type of performance option on your Panda. You can control
parameters on your software in a way that would not be possible on a standard dial or slider. The pressure pads can
be used to make some very interesting effects.
As we’ve seen above, each pad can be assigned an individual MIDI controller number.
As you apply more and more pressure to the pad, the value of the controller you are sending will increase, until the
maximum value is reached. On release, the pad will return to the minimum value.
3.5.2 Pad Curve
The Pad Curve setting is used to set the response curve of all eight pads. It is not possible to set the response curve o
the pads independently.
3.5.3 Pads Note setting
Press one pad, then press assign. After that you shall press shift, then you can set the MIDI note by numeric
buttons or +/- buttons. and press ENTER to confirm.