Worx Landroid WG795E - Cleaning the Mower

Lawn Mowing Robot EN
14
When storing, lay the Landroid
®
L flat on all four wheels in a dry
place out of icy weather. It is suggested to store your Landroid
®
L
in its original box. It is best to put the Charging Base, Low Voltage
Cable (4), and Transformer (22) indoors over the winter season as
well (See Fig. M).
The Boundary Wire can be left in the ground although its ends
should be protected, such as placed in a tin can with grease. If the
Charging Base is left outside for winter, leave the Boundary Wire
connected.
NOTE: When bringing the Landroid
®
L back to life after winter
hibernation, make sure the Charging Strips (5) and Contact Pins (2)
are clean, it is best to use a fine grade emery cloth. Then make sure
the date and time are correct and send the Landroid
®
L back to what
it loves doing: mowing.
5.3 Keep it clean
WARNING: Before cleaning turn your Landroid
®
L OFF by pressing the ON/OFF Button to OFF. Put
on protective gloves before cleaning the Blade Disc (16) and do not use running water.
(See Fig. J, K, L)
A. Cleaning the body
Your Landroid
®
L will live a much happier and longer life if it is cleaned regularly. Although, as your Landroid
®
L is an electric
machine, you will need to take care when cleaning, so DO NOT use a hose or otherwise pour running water on your
Landroid
®
L, it is best to use a spray bottle filled with water. When cleaning the machine body use a soft brush or clean
cloth and avoid using solvents or polishes (See Fig.N) .Lastly, make sure that you remove all build up of grass clippings and
debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
®
L OFF using the ON/Off Button wear protective gloves before touching the
Blade Disc (16).
First, flip your Landroid
®
L upside down to expose its underside. Here you
will see the Blade Disc (a), the surrounding Motor Frame Box (b) (14), and
the Front (18) and Drive (11) Wheels. Clean everything thoroughly with a
soft brush or moist rag. (See Fig.O)
Rotate the Blade Disc to make sure it moves freely and that there is not
anything lodged between it and the surrounding Motor Frame Box. Also,
make sure the Blades are able to spin freely and that there's no grass
obstructing them.
IMPORTANT: Remove any lodged debris so that it does not
cause a crack in the Blade Disc. Even the tiniest crack can
decrease your Landroid
®
L's mowing output.
O
(a)
(b)
N
M