EasyManua.ls Logo

Worx WG169E - User Manual

Worx WG169E
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3 in 1: Trimmer / Edger / Mini mower
WG169E WG169E.2 WG169E.5 WG169E.9
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS

Other manuals for Worx WG169E

Questions and Answers

  • C
    Carla SmithSep 6, 2025
    Why Worx WG169E Trimmer cutting time per battery charge is too short?
    • K
      Kathryn CampbellSep 6, 2025
      The cutting time might be too short if the battery hasn't been used for a long period or has only been charged for a short time, so ensure regular use and proper charging. Also, this can happen if the grass is too high; in this case, cut the grass to a manageable height. A defective battery can also cause this, so consider replacing the battery.
  • M
    Michael ChangAug 22, 2025
    Why is my Worx Trimmer not working after long storage or with high grass?
    • M
      Mark JensenAug 22, 2025
      If the Worx Trimmer battery hasn't been used for a long time or was only charged briefly, fully charge it, referring to the 'HOW TO CHARGE YOUR BATTERY' section. If the grass is too high, cut it in stages. If the battery is defective, replace it.
  • D
    Dylan WilliamsSep 3, 2025
    What to do if my Worx Trimmer battery charger is not working?
    • C
      Chad PearsonSep 4, 2025
      If the plug of the Worx Trimmer battery charger is not plugged in properly, fully insert it into the socket outlet. If the socket outlet, mains cable, or battery charger is defective, check the mains voltage and have the battery charger checked by an authorized after-sales service agent.
  • D
    Derek FoxSep 2, 2025
    What to do if Worx Lawn and Garden Equipment line is used up?
    • J
      Jeremy MartinSep 2, 2025
      If the line of your Worx Lawn and Garden Equipment is used up, replace it with a new spool of line.
  • V
    vazquezcharlesSep 1, 2025
    What to do if Worx Trimmer auto feed does not work?
    • T
      Taylor ShawSep 1, 2025
      If the auto feed on your Worx Trimmer isn't working, it could be due to the cutting line not being wound well; rewind it properly. The line might also be tangled, so untangle it. If the line is used up, replace it.
  • R
    robinsonrickyAug 30, 2025
    Why does Worx WG169E Trimmer run intermittently?
    • L
      Larry TranAug 30, 2025
      An intermittent Worx Trimmer could be caused by a broken motor, so consider replacing it. Also, check if the battery is not fully charged and charge it completely. A defective On/Off switch can also cause this issue, so replace the switch if necessary.
  • S
    sarahcastilloAug 29, 2025
    What to do if Worx Trimmer machine does not cut?
    • D
      Devin CamposAug 29, 2025
      If your Worx Trimmer isn't cutting, the line may be broken, so replace the cutting line. Another reason could be that the battery is not fully charged, so charge the battery. If the motor is broken (resulting in low speed), replace it. Also, check for and clear any grass entangled around the cutting head.
  • M
    mkelleyAug 27, 2025
    What to do if the line is broken or grass is entangled in my Worx Trimmer?
    • K
      Kathleen HaleAug 27, 2025
      If the line of your Worx Trimmer is broken, replace it. If the battery isn't fully charged, recharge it, consulting the 'HOW TO CHARGE YOUR BATTERY' section. If the motor is broken or the speed is too low, contact a service agent. If grass is entangled around the cutting head, remove it.
  • D
    Donna DavidsonAug 26, 2025
    What to do if my Worx Trimmer battery is discharged or the motor is broken?
    • J
      Jermaine WilliamsAug 27, 2025
      If your Worx Trimmer's battery is discharged, recharge it, referring to the section on 'HOW TO CHARGE YOUR BATTERY'. If the battery is too hot or cold, allow it to cool or warm to room temperature. If the motor is broken or the internal wiring is damaged, contact a service agent for assistance.
  • S
    Sheri DavilaAug 25, 2025
    How to fix Worx Trimmer when the cutting line is tangled or not winding well?
    • M
      Meredith LynchAug 25, 2025
      If the cutting line on your Worx Trimmer is not wound well, manually feed the line; if it still won't feed out, remove the spool and rewind the line. If the line is used up, replace it with a new spool of line.

Summary

General Safety Warnings

Battery Pack Safety Warnings

General Battery Safety

Do not dismantle, open, shred, or short-circuit battery packs.

Battery Pack Handling and Storage

Avoid heat, fire, sunlight, mechanical shock, and improper storage.

Battery Leakage and Swallowing

Handle leaks carefully, wash affected areas, and seek medical advice if swallowed.

Battery Maintenance and Charging

Keep clean/dry, charge before use, do not overcharge, and charge/discharge for performance.

Charger and Battery Compatibility

Use only specified chargers and compatible battery packs.

Battery Storage and Disposal

Keep out of children's reach, retain literature, remove when not in use, and dispose properly.

Technical Data

Noise Data

Vibration Information

Assembly

Operation

Intended Use

Machine is for cutting grass and weeds in areas unreachable by lawn mower.

Before Using Your Cordless Grass Trimmer

Battery pack is uncharged and must be fully charged before first use.

Charging Your Battery Pack

Li-Ion battery protected against deep discharge; trimmer stops when empty.

Maintenance

Troubleshooting

Worx WG169E Specifications

General IconGeneral
Power SourceBattery
Voltage20V
Battery TypeLithium-ion
Cutting Width30cm
Line Diameter1.65mm
Weight2.6kg
Line Feed SystemAutomatic
Telescopic ShaftYes
Edging FunctionYes
TypeCordless Grass Trimmer

Related product manuals