Electric chain saw EN
1918 1918
protrude (b) must be fitted into the bar hole.
(See fig. S)
SHARPENING SAW CHAIN
WARNING: Unplug chain saw from
power source before servicing.
Severe injury or death could occur from
electrical shock or body contact with
moving chain.
WARNING: Cutting edges on chain
are sharp. Use protective gloves
when handling chain.
Keep chain sharp. Your saw will cut faster and
more safely. A dull chain will cause undue
sprocket, guide bar, chain, and motor wear. If
you must force chain into wood and cutting
creates only sawdust with few large chips,
chain is dull.
To Next Page
Loading...
Need help?
General
