Cordless Chain Saw EN
8
TECHNICAL DATA
Type WG368E WG368E.9 (3-designation of machinery, representative of Chain Saw)
WG368E WG368E.9
Voltage 40V
Max**
Bar length 300mm
Cutting length 250mm
Chain speed 3.8m/s
Oil tank capacity 100ml
Chain pitch 9.5mm
Number of chain links 45
Chain gauge 1.1mm
Saw chain type
Oregon
®
: 90PX
Bar type
Oregon
®
: 124MLEA041
Charging time 1hr /
Weight( chain & bar included) 3.8kg 3.0kg
**Voltage measured without workload. Initial battery voltage reaches maximum of
40 volts. Nominal voltage is 36 volts.
NOISE INFORMATION
A weighted sound pressure L
pA
:85dB(A)
A weighted sound power L
wA.d
:100dB(A)
K
pA
3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value: a
h
= 3.5m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
To Next Page
Loading...
Need help?
General
