12
EN
5.4 Working time adjust (See Fig. 37)
You can rapidly adjust the work time of the week. The increment /decrement of time will be evenly allocated to required working
days.
A. Return to main interface.
B. Anticlockwise rotate to activate the working time adjust.
NOTE: The total time is based on the customized work time, and can be adjusted by gradient of 10%.
C. Then rotate to adjust and short press to confirm.
5.5 Adjust the blade height (only for WR213E) (See Fig. 38)
A. Back to home page, clockwise rotate to select General settings and press to confirm.
B. Clockwise rotate to select Blade height adjustment, press to confirm.
C. Press button, the cutting height can be adjusted between 30-60 mm (5 mm every turn ). Clockwise rotate to select
the cutting height you prefer, and then press to confirm.
To Next Page
Loading...
