Wow SparkMaker User Manual

70
(As shown) Slowly pull
up the Z axis and the
working plane
,
open the
FPC interface upwards
,
release the FPC cable of
the LCD and the knob
,
pull out the four-wire
plug of the photoelectric
switch and screw motor
upwards
,
and pull out the
five-wire plug of the light
board upwards.
DC input
Motor interface
Photoelectric
switch interface
LCD interface
Five-wire plug
＊
Notice:
Please carefully open the FPC
interface and carefully pull out the
plug
,
do not tear the cable.
FPC cable
Four-wire plug
Knob interface
Light board interface
Fan interface
Replace the light board
71
Replace the light board
(As shown) Slowly pull
up the Z axis and the
working plane
,
open
the FPC interface
to loosen the LCD
screen cable
,
pull out
the four-wire plug
of the photoelectric
switch
,
stepper motor
and light board
upwards
,
and pull out
ten-wire plug of the
knob upwards.
Ten-wire plug
DC input
Motor interface
Photoelectric
switch interface
Four-wire plug
FPC cable
Fan interface
LCD interface
＊
Notice:
Please carefully open the FPC
interface and carefully pull out
the plug,do not tear the cable.
SparkMarker
Mainboard
SparkMarker FHD
Mainboard

Wow SparkMaker Specifications

General

Brand	Wow
Model	SparkMaker
Category	3D Printers
Language	English