WPI EVOM Manual - Viewing Data in Microsoft Excel or Other Spreadsheet Program

EVOM™ Manual
World Precision Instruments 15
Viewing Data in Microsoft Excel or Other Spreadsheet
Program
1. Remove the USB thumb drive from the EVOM™ Manual and plug it into a free
USB slot in your computer.
2. Open the drive and look for les named PlateX.CSV .
3. If your computer has Microsoft
®
Excel or another spreadsheet program the le
will open by clicking on the le. The well data is loaded into spreadsheet cells.
4. To transfer the data le to your computer, select the plate les and copy it to a
folder on your computer.
Sample resistance le shows:
• Date, time, plate size
• EVOM™ Manual rmware revision
• Measurement mode with a blank or a voltage oset
• Units ohms or kilo ohms
• Recording direction, 1-4 (See "Plate Selection Page and Plate Preview" on
page 10.)
• Resistance scale (10K, 50K, 100K), and the last used scale is shown
• Well data in the plate grid with the blank oset applied.
Sample Resistance File (*.CSV)
Date 03/12/2020 13:11:56 Well Plate 24
EVOM™ Manual Version 1.0
MODE OHMS oset 999.8
Units: OHMS
Direction 1
Resistance Scale 50k Ohms
0 1 2 3 4 5 6
A 19015 19015 19015 19015 19015 19015
B 19016 19016 19016 19016 19016 19016
C 19016 19016 19016 19016 19016 19014
D 19014 19014 19014 19014 19014 19017
Sample Voltage File(*.csv)
Date 03/12/2020 13:12:48 Well Plate 24
EVOM™ Manual Version 1.0
MODE PD oset -0.0 mV
Units: mV
Direction 1
Resistance Scale 50k Ohms
0 1 2 3 4 5 6
A 0.0 0.0 0.0 0.0 0.0 0.0
B 0.0 0.0 0.0 0.0 0.0 0.0
C 0.0 0.0 0.0 0.0 0.0 0.0
D 0.0 0.0 0.0 0.0 0.0 -0.0