Page 3 of 39 WIM-TD-002_C
Signal Words & Definitions
Throughout this manual there are several safety messages that must be read and
adhered to in order to prevent
possible loss of equipment and/or personal injury and
/or loss of life. The three signal words are “Danger”, “Warning” and
“Caution”. They are
used to indicate the severity of the hazard and are preceded by a safety alert symbol.
“Danger” - Denotes the most serious
injury hazard and is used when serious injury or death
WILL result from misuse or failure to follow the specific
instructions set forth in this manual.
“Warning” - Denotes when serious
injury or death MAY result from misuse or failure to
follow the specific instructions set forth in this manual.
“Caution” - Denotes when injury or
product or equipment damage may result from the
misuse or failure to follow the specific instructions set
forth in this manual.
To Next Page
Loading...