WPT POWER PILOTLESS - Appendix A; General Appendix Information; Hardware Tightening Specifications

Page 35 of 39 WIM-TD-002_C
Appendix A
GENERAL
DESCRIPTION
REFERENCE
CLUTCH ADJUSTMENT
Table 2, Section 3.5
LUBRICATION
Tables 6
HARDWARE TIGHTENING
DESCRIPTION
THREADLOCKER
TORQUE SPECIFICATION
OR REFERENCE
NAMEPLATE BOLTS
NONE
Table 7
BELLHOUSING TO BEARING
CARRIER BOLTS
LOCTITE 242 OR EQUAL, OR
NONE IF LOCKING WASHER IS
USED
BEARING RETAINER LOCK BOLT
HUB NUT
BEND LOCKING TAB OVER NUT
FLAT AFTER TIGHTENING
90-110 lbf-ft (122-149 Nm)