WSE Technologies DR4201 - TUNE Command (for the Nexsentry Star and 4100-Series Controllers)

DigiReader Series
26 P/N 6600025, REV. D
gnitoohselbuorT
noitacinummocdna,srorrenoitacinummoc,rewop:seirogetaceerhtotnillafsdohtemgnitoohselbuortdleiF
snoitcadetseggussedivorpdnasnoitidnocesehtfosmotpmysnommoctsomehtstsilwolebelbatehT.seruliaf
.melborpehtydemerdnayfitnediot
motpmySnoitcAgnitoohselbuorT
nitiltonDEL
edomydaer
rewopkcehC
ylppusrewopkcehC
rotcennocxineohPkcehC
sesufkcehC
sCIdetekcoskcehC
eruliaFmmoC
edomydaernitilDELkcehCevobaees,tonfI
teN-SkcehC
snoitcennocelbackcehC
gnidnuorgylppusrewopkcehC
daeRoN
daeRwolS
egnaRdaeRtrohS
)srorrEmmoC(
sMORPEkcehC
teN-SkcehC
noitanimrettcerrocyfireV
?ratSxeNdeen-htgnelkrowteN
sgnidnuorgnommocyfireV
snoitcennocdleihskcehC
*dnammocENUTmrofreP
)sdaertsohG(sdaer-siMT:evobanoitcesehteeS
ESTING THE DIGIREADER LOCATION
:woleb,dnammocENUTfonoissucsideeS*
TUNE Command (for the NexSentry Star and 4100-Series controllers)
YOUR COMMAND? TUNE
DOOR (1-16) ? 1 (door with a DKR reader)
1. DIGITAL KEY READER RANGE (0-255): 253 ? (power control)
2. SEND TO ACU ONCE (Y/N): Y ? (no. of times the DKR sends key to ACU)
3. NUMBER OF VERIFICATION KEY READS (0-255): 0 ?(no, of retries, for high RF environment)
4. VERIFICATION TIME WINDOWS (0000-FFFF): 20 ? (hex 20 = decimal 32)
5. BEEPER BEHAVIOR WITH A VALID KEY
ON DURATION (0000-FFFF): A ? (hex A = decimal 10)
OFF DURATION (0000-FFFF): A ?
ON-OFF TOOTAL DURATION (0000-FFFF): 14 ? (hex 14 = decimal 20)
NOTE: DR4201, DR4208S, and DR4220 readers use only question 5, for the beeper.
Проектирование. Монтаж. Продажа. - http://vskd.ru