Wyrestorm MX-0404-POH-KIT - 1 Introduction; Table of Contents

2
Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343 US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
Contents 1. Introduction
CONTENTS AND INTRODUCTION
Flexible, powerful, convenient and aordable; the
Wyrestorm mx-0404-poh-kit oers the integrator the best
of all worlds with a combined HDBaseT™ matrix switching
and display receiver solution oering remote powering of
display zones for plug-and-play simplicity for small-to-
medium sized distribution and control integrations.
The MX-0404-POH-KIT features high quality, low latency
Hdbaset Class B technology for 4x4 distribution and matrix
switching over a single Cat5e/6 cable with four matching slim-line
Poh display receivers of just 15mm height for the lowest form
factor available on the market, more than capable of installation
behind even the slimmest display wall plates.
Allowing connected HDMI inputs to be distributed independently
and simultaneously over distances of up to 70m/230ft to any
display receivers connected to the matrix, regardless of HDCP
encryption, the MX-0404-POH-KIT oers HDBaseT signal
stability for the transmission of lossless 1080p HD Video up to
60Hz / 36bit, HD multichannel audio, bidirectional control via IR
from a centralised AV location to displays using unshielded or
shielded Cat5e/6 cable*, with further control via RS232 including
full compatibility with leading control systems.
PoH (Power-over-HDBaseT) enables power to be passed along
the cable along with transmissions from the matrix to power
receivers at display zones without the need for local mains
power for greater exibility and convenience during installation
as well as improved energy eciency compared to a permanent
mains connection.
The system oers exibility and reliability of signal distribution,
combined with innovative features and an ease of use to deliver
HD audio and video and power, controlled via IR, RS232 or LAN,
all on a single Cat5e/6 cable that removes the need for additional
control, video cables and power supplies on installations,
whether in a residential or commercial setting.
All of which guarantees a quick, hassle-free installation, whatever
the application, for the very best in reliable and aordable single
cable AV distribution and control.
*When using shielded cable, please ensure you use
shielded RJ45 connectors and terminate the grounding
wire at both ends of the cable. This is standard practice
when using FTP shielded cable.
For further information on this product and other WyreStorm
ranges, visit our website or download our latest product guide.
wyrestorm.com
Introduction
Features
Safety Precautions
Package Contents
Panel Display:
i. Panel Description - Matrix
ii. Panel Description - Receiver
Typical Application
Connection
Basic Operation
i. Front Panel Control
ii. Remote Control Operation and Battery Replacement
iii. IR Extender Control
iv. IR call-back of Matrix and Source Devices
v. Two-way IR call-back between Matrix, Sources and
Displays from multiple locations
Advanced Operation
i. RS232 Control
ii. Updating RS232 Settings
iii. COM CTL Control
iv. LAN Control with SmartSet GUI
v. EDID DIP Switch Setting
Specications
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
12
Troubleshooting
FAQ
Maintenance
Provided Service
Mail In Service
Disclaimer
Installation Notes
Warranty
Warranty Limits and Exclusions