SW-0501-HDBT HDBaseT Presentation Switcher/Scaler Installation Guide | 160211-1512
Rebooting and Restoring Factory Defaults
To Reboot the Switcher
1. Access the Web-UI. See Accessing the Web User Interface (Web-UI)
2. Navigate to: System > Commands
3. Select Reboot to reboot the switcher.
4. Click Apply to save the changes.
To Restore Factory Defaults
1. Access the Web-UI. See Accessing the Web User Interface (Web-UI)
2. Navigate to: System > Commands
3. Select Reset to Factory Defaults to restore defaults for the switcher.
Resetting defaults will erase all configured settings and return the switcher to the factory settings including the login password.
4. Click Apply to save the changes.
Viewing Switcher Information
The current use status and version information of the switcher can be viewed through the Web –UI.
1. Access the Web-UI. See Accessing the Web User Interface (Web-UI)
2. Navigate to: System and scroll down to view the various sections.
Status & Statistics – displays the latest source and display information.
Version Info – current firmware version installed in the switcher.
Log – displays the last 100 recorded operations
To Next Page
Loading...
