Copyright © 2015 WyreStorm Technologies | wyrestorm.com
Supported Video Resolutions
The type of category cable used and the distance between
the switcher and receiver can restrict the available video
resolution.
1080p@60Hz 48bit
1080p@60Hz 3D
Note:
When connected to a class B HDBaseT receiver, the
supported distance is limited to 70m/230ft 1080p.
IR Wiring
The IR port on the switcher is used to send IR to a remote
device via HDBaseT and to a local device from the remote
location. In addition to the standard In and Out port
contains pins that can provide 5V DC to power an IR
Receiver or an IR Emitter with talkback.
Remote I/O Control Device Wiring
The SW-0501-HDBT may be controlled using a contract
closure remote I/O device. Connection uses an 11-pin
phoenix connector that also provides LED feedback to the
device for all 5 inputs.
To Next Page
Loading...
