SW-0501-HDBT HDBaseT Presentation Switcher/Scaler Installation Guide | 160211-1512
1. Product Overview
The SW-0501-HDBT allows for up to 4 HDMI and 1 VGA inputs (+audio). The internal scaler provides instant source switching by
matching the resolution of the sink device up to 1920x1200p. There is also an adjustable microphone input with selectable phantom
power, which can be mixed with source audio and sent via the audio output. Signal transmission is via HDMI or by HDBaseT for
transmission up to 100m. PoH and control signals can be all sent to the RX-70-4K HDBaseT receiver (sold separately).
Key Features
4 HDMI inputs & 1 VGA input
HDBaseT Output with PoH up to 100m
Duplicate HDMI output
Fast seamless switching, with auto-scaler up to 1920x1200
Auto switching between sources, uses last-in/first-out logic
Audio inputs for microphone, and VGA audio embed
Use either dynamic or condenser mics with switchable phantom power
Rotary knob on front panel for Mic gain control
5x I/O ports for signal switching and LED out for desk-mounted connection panel
Automatic CEC trigger on output—Switcher can send power commands to sink devices via CEC or RS-232 Port
Controls power of sink devices, according to the status of input sources via CEC, or RS-232. Supports Bi-directional IR and RS-232
pass-through
Control via RS-232 or LAN
Built-in Web UI for customization of sink device power on/off and advanced settings
In the Box
1x SW-0501-HDBT Presentation Switcher/Scaler
1x AC Power Cord
1x 11-pin Screw Down Phoenix Connector
1x 5-pin Screw Down Phoenix Connector
2x 4-pin Screw Down Phoenix Connector
4x 3-pin Screw Down Phoenix Connector
2x Mounting brackets
1x Quickstart guide
To Next Page
Loading...
