www.xa.com/en 9
Tighten connectors on both sides with cable ties upon the connection between Power Cables of Arm
No.1 & No.2 in the Bottom Central Compartment. (The red connector ts only to the other red connector
while the black one connect to the other black one)
Connect Signal Cable of Flight Indicator and Sprayer
Pull the Flight Indicator Signal Cables of Arm No.1 and Arm No.2, plus those of the lights and sprayers of
Arm No.3 and Arm No.4 through the hole on the Spraying Hub to the Bottom Central Compartment.
Hole
To Next Page
Loading...
