EasyManuals Logo

Xantrex 200 User Manual

Xantrex 200
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Important Safety Instructions
vi 975-0057-01-01
WARNING: Fire hazard
The jump-start feature is designed for short term
operation only—less than 4 seconds. Operating the
jump-start feature for more than 4 seconds may
cause damage to the unit. Allow the XPower
Powerpack 400 and XPower Powerpack 400 Plus to
cool down for at least 3 minutes after each jump-
start.
WARNING: Risk of explosion, fire or
burns
The battery terminals exposed at the Jump-Start
Cable Port have enough energy present to cause a
spark, creating an explosion hazard, or to cause burns
if a metal object contacts both terminals. Always clip
the plastic guard over the Port when not in use.
WARNING: Fire Hazard -
XPower
Powerpack 400 Plus
Do not leave the compressor unattended while
operating. The compressor is designed for short term
operation only. Operation of the compressor over an
extended period of time will cause the compressor
unit to overheat and may cause damage. Allow the
compressor to cool down for 10 minutes after each
10 minutes of continuous operation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantrex 200 and is the answer not in the manual?

Xantrex 200 Specifications

General IconGeneral
BrandXantrex
Model200
CategoryPower Pack
LanguageEnglish

Related product manuals