Important Safety Instructions
975-0057-01-01 v
WARNING: Heated surface
Ensure at least 2" (5 cm) air space is maintained on
all sides of the XPower Powerpack 400 and XPower
Powerpack 400 Plus. During operation, keep away
from materials that may be affected by high
temperatures such as blankets, pillows and sleeping
bags.
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps
to touch each other or another common metal
conductor. This could cause damage to the unit and/
or create a sparking/explosion hazard. Always
disconnect the jump-start cables from the unit after
use and clip the plastic guard over the jump-start
cable port.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive
to positive (red clamp to battery “+”) and negative to
negative (black clamp to battery “-”). A reverse
polarity connection (positive to negative) may cause
damage to the unit and/or create a sparking/explosion
hazard.
To Next Page
Loading...
