EasyManuals Logo

Xantrex 200 User Manual

Xantrex 200
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Maintenance
4-2 975-0057-01-01
s.
Recharging the XPower Powerpack Battery
To check the battery’s charge level, press the Display
Function button.
You can recharge the battery using:
the fully automatic “plug-in-and-forget” AC Charger.
the DC Charging Cable to recharge from your vehicle as
you drive.
a generator equipped with a regulated 12 V battery
charging outlet.
a solar panel.
CAUTION
Due to inherent self-discharge, lead acid batteries
must be charged at least every 3 months, especially
in a warm environment. Leaving a battery in a
discharged state, or not recharging every 3 months,
may result in permanent battery damage and poor
jump-start performance.
CAUTION
Do not attempt to recharge the XPower Powerpack
battery if it is frozen. Gradually warm the frozen
battery to 32 °F (0 °C) before recharging.
Note: Battery Charge (%) status is only accurate when
the XPower Powerpack has been disconnected from all
appliances and all charging sources for fifteen minutes.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantrex 200 and is the answer not in the manual?

Xantrex 200 Specifications

General IconGeneral
BrandXantrex
Model200
CategoryPower Pack
LanguageEnglish

Related product manuals