Need help?Do you have a question about the Xantrex 200 and is the answer not in the manual?
General| Model | Xantrex 200 |
|---|---|
| Input Voltage | 12V DC |
| Frequency | 60 Hz |
| Battery Type | Lead Acid |
| Efficiency | 85% |
| DC Output | 12V DC |
Details warning and caution symbols used in the manual for safety information.
Covers shock hazards, keeping children away, environmental limits, and operational cautions.
Details risks from flammable fumes, hydrogen gas, heated surfaces, and sparks.
Specific safety guidelines for battery handling, emphasizing explosion and fire risks.
Advises on appliance compatibility due to non-sinusoidal output.
Provides an overview of the XPower Powerpack's capabilities, including powering AC/DC appliances and jump-starting.
Details built-in protections like overload shutdown, overheating protection, and low battery cutoff.
Explains the user-replaceable fuse protecting the unit from reverse polarity and short-circuit conditions.
Lists all items included in the XPower Powerpack package, including optional accessories.
Details the main features and components on the front panel, including ports and display.
Describes the integrated air compressor, including gauge and hose.
Identifies features on the left side, such as the light and jump-start port.
Explains the storage compartment's contents, including the AC charger and fuse.
Lists and describes jump-start cables, DC charging cable, and accessory bag.
Provides safety cautions and guidelines for operating the Powerpack, including charger connection.
Details recommended environmental conditions for operation, including dry, cool, and ventilated areas.
Guides on initial setup, emphasizing the need for a fully charged battery before first use.
Explains recharging via AC charger, status lights, and charging time.
Describes the operation and battery life of the integrated incandescent light.
Introduces operating AC appliances, including understanding power ratings and limitations.
Provides run times for appliances based on wattage.
Discusses appliances with high surge needs and those susceptible to damage from non-sinusoidal output.
Explains running multiple appliances, considering total wattage and run time.
Step-by-step guide for connecting and operating AC appliances, with safety warnings.
Details powering 12V DC appliances, with cautions on battery discharge.
Lists 12V DC appliances and their run times based on battery capacity.
Provides instructions and safety warnings for jump-starting a vehicle.
Explains using the air compressor, including limits and cool-down periods.
Offers pressure specs for tires and inflatables as a guide for compressor use.
Explains extending operation by connecting to a larger external battery, with safety warnings.
Emphasizes power disconnection before maintenance and cleaning the unit.
Discusses periodic recharging for battery capacity and life.
Outlines methods like AC charger, DC cable, generator, and solar panel.
Details AC charger procedure, status lights, and charging time.
Explains recharging using the DC cable while driving, including voltage warnings.
Covers recharging via generator's 12V DC outlet, including voltage requirements.
Explains recharging using a solar panel, including connector and charging time.
Discusses battery life maximization and the process of replacing the internal battery.
Lists approved replacement batteries and where to purchase them.
Provides step-by-step instructions for safely replacing the internal battery, including warnings.
Step-by-step guide for replacing the built-in light bulb.
Instructions for replacing the external fuse, specifying rating and procedure.
Addresses common issues like buzzing in audio equipment and television interference.
Provides solutions for AC appliances not operating or overload shutdowns.
Offers solutions for inverter overheating, alarms, and short run times.
Addresses low voltage, charging light issues, and display accuracy.
Solves compressor issues and charging status problems.
Provides solutions for jump-start failures and the light not turning on.
Lists detailed electrical specs for the 12V DC section, including battery type and ports.
Details AC power output, voltage, waveform, and operating parameters.
Provides specs for the charging controller, including currents and voltages.
Lists pressure specs for the air compressor on the 400 Plus model.
Details specs for accessories like jump-start cables and DC charging cable.
Compares physical dimensions and weight for the 400 and 400 Plus models.
Introduces warranty details and return instructions for the XPower Powerpack.
Explains what the limited warranty covers, Xantrex's obligations, and service transferability.
Details what the warranty does not cover, including misuse and environmental damage.
States the sole warranty, disclaiming other warranties and liability for damages.
Warns against using the Powerpack with life support systems or as an uninterruptible power supply.
Explains returning a product for service, including obtaining an RMA number.
Outlines packaging and shipping for returns, including documentation.
Describes options for servicing or replacing units after the warranty period.
Provides a form to record system details for customer service, aiding troubleshooting.
To Next Page
