EasyManuals Logo

Xantrex 200 User Manual

Xantrex 200
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Using the Air Compressor: XPower Powerpack 400 Plus
975-0057-01-01 3-13
Over-Temperature Safety Protection
It is recommended that you follow the warnings and turn the
compressor off for 10 minutes after every 10 minutes of
operation. However, the XPower Powerpack 400 Plus is
equipped with an over-temperature safety protection feature
that automatically turns the compressor off if it begins to
overheat. Once the compressor cools down to its normal
operating temperature it will automatically turn on again and
continue inflating. You should turn the compressor off at the
power switch if this safety feature engages, and allow the
compressor to cool for 15 minutes before re-starting.
WARNING: Fire Hazard
Do not leave the compressor unattended while in
operation. Keep out of reach of children.
WARNING: Risk of personal injury or
damage to equipment
Never leave the compressor unattended while in
operation. The compressor is capable of inflating to
250 PSI. Do not exceed the recommended pressure
of either the compressor or the object being
inflated. If either recommended pressure is
exceeded, an explosion may result.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xantrex 200 and is the answer not in the manual?

Xantrex 200 Specifications

General IconGeneral
BrandXantrex
Model200
CategoryPower Pack
LanguageEnglish

Related product manuals