Xerox 4112 Pdl Reference Guide

Page 8 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
Quantity <</NumCopies value >>
setpagedevice
Where value is one of the following:
integer from 1 to 9999 : number of copies
null*: Not specified
Collation <</Collate value >>
setpagedevice
Where value is one of the following:
true = collated
false* = uncollated
Offset <</Jog int >>setpagedevice Where int is one of the following:
0* = Do not offset
3 = Offset at the beginning of each page
[set]
Stapling
(w/
D-Finisher)
<</Staple int1
/StapleDetails << /Type 7
/Location int2 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where int2 is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
5 = bottom-double
6 = left-double
7 = right-double
Punch
(w/
D-Finisher)
<</Punch int1
/PunchDetails << /Type 5
/Position int2
/Numholes int3 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not punch
3 = Do punch by set unit.
Where int2 is one of the following:
0 = topside
1 = bottom side
2 = left side
3 = right side
Where int3 is one of the following:
2 = 2 holes
3 = 3 holes
4 = 4 holes
Fold
(w/ D-Finisher
and folding
module)
<</Fold int1
/FoldDetails << /Type 6
/FoldType int2
/ImageRotation int3
/PrintInside value4 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not fold.
4 = Fold every page..
Where int2 is one of the following:
0* = Z Fold Half Sheets.
1 = Z Tri-Fold Single Sheets.
2 = C Tri-Fold Single Sheets.
Where int3 is one of the following:
0* = Do not rotate image.
1 = Roate image 180 degrees.
This feature is effective only in

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English