Xerox 8264E - Page 114

Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-30
Effect (cont.) A-S.Fine&Wave Performs "Wave" printing using only one side of the print
head’s nozzles (designated as the A
side).
Since only half of the print head’s nozzles are used, the
time to print is twice as long as it is when "Wave 1, 2, 3, or
4" is used.
Set up this menu if you need to improve the print quality
compared with "Fine&Wave 1 to 4."
B-S.Fine&Wave Same as immediately above. Performs "Wave" printing
using only half of the print head’s nozzles but uses the
other
side nozzles (designated as the B side).
Again, since only half of the print head’s nozzles are used,
the time to print is twice as long as it is when "Wave 1, 2, 3,
or 4" is used.
Set up this menu if you need to improve the print quality
compared with "Fine&Wave 1 to 4."
—
•Pressing the [Enter] key saves the setting and shifts to the
previous menu.
•Pressing the [Cancel] key cancels the setting and shifts to
the previous menu.
Setup menu Setup item 1 of 7 total)
Setup item Setting Description