Why are parts of images missing when printing with my Xerox Printer?
To resolve missing parts of images when printing with your Xerox Printer, check the size of the image being sent and allow for the default margins. Alternatively, specify a smaller media width in the RIP, compensating for the margins. Consider the condition of the media as well.
Why my Xerox Printer does not work at all after power activation?
If your Xerox Printer isn't working after turning it on, make sure the power cable is properly connected to an electrical outlet and that the outlet provides the correct voltage. If it still doesn't work, ensure that the front cover and maintenance cover (8264E only) are closed and the media loading lever is lowered.
What to do if my Xerox 8254E Printer does not work after loading the media?
If your Xerox Printer is not working after loading the media, ensure that the front cover and maintenance cover (8264E only) are closed, and the media loading lever is lowered. Check that the media is loaded straight, the ink cartridge is inserted, you are using recommended media, and the printer is used in a specified environment.
Why does media jams frequently occur in my Xerox 8254E?
If media jams frequently occur in your Xerox Printer, ensure that you are using recommended and new media in a dedicated environment. If the media bends, use recommended media and set the Vacuum Fan menu.
What to do if the head strikes on good media of my Xerox 8254E Printer?
Raise the pressure rollers and manually pull about 12" of media through just before printing. Lowering the heater temperatures might help, but this can negatively affect the image quality if the head strikes on good media of your Xerox Printer.
Why does the media veer off-track during printing on my Xerox Printer?
If the media veers off-track during printing with your Xerox Printer, ensure you are using recommended media and that it is loaded correctly. For 8264E models, ensure the roll media is set correctly; for 8254E models, ensure the scroller is set correctly.
How to correct the printing position on my Xerox 8254E Printer?
If the printing position is incorrect on your Xerox Printer, ensure the media is loaded correctly. Cancel or reset the origin and print position settings.
What causes the media to be crumpled during initialization in Xerox 8254E?
If the media is crumpled during initialization with your Xerox Printer, make sure you are using recommended media and that it is correctly loaded straight. Clean the pressurizing roller and only use the printer in its specified environment. Replace any folded, torn, or rolled media.
Why are parts of images missing when printing with Xerox 8254E Printer?
To address missing parts of images when printing with your Xerox Printer, verify that the image size accounts for the side margins. Adjust the media width in the RIP settings to compensate for these margins, ensuring the entire image fits within the printable area.
How to fix white or black lines on prints from my Xerox 8254E?
If white or black lines, banding, or waves appear on printed media from your Xerox Printer, ensure you are using recommended media. For 8264E models, check that the roll media is set correctly; for 8254E models, verify the scroller setting. Perform head cleaning, alignment, and media feed compensation. Ensure each heater is set to the correct temperature, and the head height is set to "Normal (Low)".
General| Print Speed (Black) | Up to 55 ppm |
|---|---|
| Monthly Duty Cycle | Up to 300, 000 pages |
| Paper Size | A4, A5, B5, Legal, Letter |
| Duplex Printing | Standard |
| Connectivity | USB, Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, macOS, Linux |
| Printer Type | Laser |
To Next Page
