Xerox 8254E - Data Error Display and Remedies; Command Error Display and Remedies

Xerox 8254E / 8264E Color Wide Format Printer
User Guide
5-16
Data Error Display and Remedies
This section describes data error messages and their remedies. A data error appears if there is a failure
in data communication between your PC and the printer.
If a data error occurs, the following error message appears in the control panel of the printer and
operation stops.
When the cause of the error is solved, the printer starts operating again.
Note:
The "***" in the error message is the code number that indicates what type of error occurred.
Command Error Display and Remedies
This section describes command errors and their remedies. A command error is displayed if a certain
failure occurs during analysis of the command data sent from your PC to the printer.
If a command error occurs, the following error message appears in the control panel of the printer and
operation stops.
When the error is solved, the printer starts operating again.
Notes:
• The "***" in the error message is the code number that indicates what type of error
occurred.
• The command code representing the error that occurred may be indicated within [ ].
• For the settings on your PC side, refer to the Operating Manual included with your PC.
No
.
Display Description Remedy Reference
1 I** Error
[ ]
An error occurred
while receiving data.
Check the
communication
requirements between
the printer and your PC.
Menu Setups on the
Control Panel
No. Display Description Remedy Reference
1 MH** Error
[ ]
An invalid command
has been sent from
the computer.
Check that the settings on
your PC and the printer are
the same.
Menu Setups on the
Control Panel