Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-89
Standby Heating Menu
Allows you to set up the length of time to preheat the heater while the printer is in standby mode.
1. Follow the procedure below to make changes to the StandbyHeating settings:
a. With "Ready to Print" displayed, press the [Menu] key. "Setup >" displays in the control panel.
b. Press the [>] key. "Media Type" displays in the control panel.
c. Press the [Enter] key. "Type *" displays in the control panel (where * is the currently-selected Media Type).
To Next Page
Loading...
