Menu item
Description
– Copy Density
– 1–5 (3*)
Device Operations : Quiet Mode
• On
• Off*
Set the printer to reduce the amount of noise that it
makes when printing.
Note: Enabling this setting slows down the
printer performance.
Device Operations : Panel Menus
• Enable*
• Disable
Set the printer to enable access to the control panel
menus.
Note: This menu item appears only in the
Embedded Web Server.
Device Operations
Clear Custom Status
Erase all custom messages.
Device Operations
Clear all remotely-installed messages
Erase messages that were remotely installed.
Device Operations : Automatically Display Error
Screens
• On*
• Off
Show existing error messages on the display after the
printer remains inactive on the home screen for a
length of time equal to the Screen Timeout setting.
Note: This menu item appears only in some
printer models.
Scanner Configuration : Scanner Manual
Registration
• Print Quick Test
Print a Quick Test target page.
Note: Make sure that the margin spacing on
the target page is uniform all the way around
the target. If it is not, then the printer margins
may need to be reset.
Scanner Configuration : Scanner Manual
Registration
• Front ADF Registration
• Flatbed Registration
Manually register the flatbed and ADF after replacing
the ADF, scanner glass, or controller board.
Scanner Configuration : Edge Erase
• ADF Edge Erase
– 0–6 (3*)
• Flatbed Edge Erase
– 0–6 (3*)
Set the size, in millimeters, of the no-print area
around an ADF or flatbed scan job.
Scanner Configuration : Disable Scanner
• Enabled*
• Disabled
• ADF Disabled
Disable the scanner if it is not working properly.
128
Xerox
®
B225/B235 Multifunction Printer
User Guide
Use printer menus
To Next Page
Loading...
Need help?
General
Weight and Dimensions
