Menu item
Description
Orientation
• Portrait*
• Landscape
• Reverse Portrait
• Reverse Landscape
Specify the orientation of text and graphics on the
page.
Lines per Page
1–255
Specify the number of lines of text for each page
printed through the PCL data stream.
• This menu item activates vertical escapement
that causesthe selected number of requested lines
to print between the default margins of the page.
• 60 is the U.S. factory default setting. 64 is the
international factory default setting.
PCL5 Minimum Line Width
1–30 (2*)
Set the initial minimum stroke width of any job
printed in 1200 dpi.
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
• 198mm*
• 203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the
physical page where data is printed.
Auto CR after LF
• Off*
• On
Set the printer to perform a carriage return after a
line feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same
line.
Auto LF after CR
• Off*
• On
Set the printer to perform a line feed after a carriage
return control command.
Print Timeout
• Disabled
• Enabled*
Enable the printer to end a print job after it has been
idle for the specified amount of time in seconds.
Print Timeout Time
1–255 (90*)
Set the time in seconds for the printer to end a print
job after it has been idle.
Note: This menu item appears only when
Print Timeout is enabled.
Note: An asterisk (*) next to a value indicates the factory default setting.
Xerox
®
B225/B235 Multifunction Printer
User Guide
135
Use printer menus
To Next Page
Loading...
Need help?
General
Weight and Dimensions
